X

M10.6-15: Specification for Unbonded Single Strand Tendons for Slab-on-Ground Construction

Your Price:$ 85.00 USD

Member Price: $ 59.50 USD

Choose Product Language

Choose Product Units


Choose Product Format

Description

This specification provides performance criteria for materials and detailed recommendations for the fabrication and installation of unbonded single strand tendons specifically used in any application of slab-on-ground construction using unbonded post-tensioned reinforcement. Specifications are presented for both “standard” and “encapsulated” unbonded single-strand tendon systems.

35 pages; 8½ x 11 in. (soft cover)

Published 2015

 

Table of Contents

TABLE OF CONTENTS

1.0 — General

1.1 — Scope

1.2 — Definitions

1.3 — References

1.3.1 — Referenced standards and organizations 4

1.3.2 — Cited publications

1.4 — System description

1.5 — Submittals

1.5.1 — Prestressing steel

1.5.2 — Anchorages and couplers

1.5.3 — Sheathing

1.5.4 — PT coating

1.5.5 — Fabrication plant

1.5.6 — Stressing records

1.6 — Fabrication

1.6.1 — General

1.6.1.1 — PTI certified plants

1.6.1.2 — Non-PTI certified plants

1.6.2 — Handling, storage, and shipping

1.6.2.1 — Handling prior to shipping

1.6.2.2 — Storage prior to shipping

1.6.2.3 — Shipping

1.7 — Delivery, handling, and storage

1.7.1 — Delivery

1.7.2 — Handling and storage

1.7.2.1 — Handling

1.7.2.2 — Storage

1.7.2.3 — Exposure

1.7.2.4 — Wedges and anchors

2.0 — Products

2.1 — Prestressing steel

2.1.1 — Mechanical properties

2.1.2 — Thermomechanical treatment

2.1.3 — Traceability

2.1.4 — Testing

2.1.5 — Strand producer records

2.1.6 — Identification

2.1.7 — Packaging, marking, storage,and protection

2.1.8 — Acceptance criteria for surface condition

2.1.9 — Compliance requirements

2.2 — Anchorages and couplers

2.2.1 — Anchorages

2.2.1.1 — Static tests

2.2.1.2 — Fatigue tests

2.2.1.3 — Bearing stresses

2.2.2 — Castings

2.2.3 — Wedges used in anchorages

2.2.4 — Couplers

2.2.5 — Compliance requirements

2.2.5.1 — Conformance testing

2.2.5.2 — Compliance

2.2.6 — Anchorages and couplers in aggressive environments

2.2.6.1 — Anchorages

2.2.6.2 — Encapsulated tendons

2.3 — Sheathing

2.3.1 — General properties

2.3.2 — Minimum thickness and diameter

2.3.2.1 — Minimum thickness

2.3.2.2 — Inside diameter

2.3.2.3 — Appearance

2.3.3 — Fabrication process

2.3.4 — Sheathing coverage

2.3.5 — Encapsulated tendons

2.4 — PT coating

2.4.1 — General properties

2.4.2 — Type of PT coating

2.4.3 — Minimum quantity

2.4.4 — Performance criteria

3.0 — Execution

3.1 — General

3.1.1 — Qualifications and inspection

3.1.2 — Recommended procedures

3.1.3 — Handling

3.1.4 — Protection

3.2 — Tendon installation

3.2.1 — General

3.2.1.1 — Support intervals

3.2.1.2 — Support system

3.2.1.3 — Tendon tolerances

3.2.1.4 — Lateral deviations

3.2.1.5 — Protection

3.2.1.6 — Protection from water

3.2.1.7 — Encapsulated tendons

3.2.2 — Stressing anchorages

3.2.2.1 — Installation

3.2.2.2 — Attachment requirements

3.2.2.3 — Cover requirements

3.2.2.4 — Pocket formers

3.2.2.5 — Encapsulated tendons

3.2.2.6 — Strand tail cover

3.2.3 — Intermediate anchorages

3.2.3.1 — Installation

3.2.3.2 — Placement

3.2.3.3 — Cover requirements

3.2.3.4 — Pocket formers

3.2.3.5 — Encapsulated tendons

3.2.4 — Fixed anchorages

3.2.4.1 — Installation

3.2.4.2 — Wedge seating methodsfor fixed anchorages

3.2.4.3 — Placement

3.2.4.4 — Encapsulated tendons

3.2.5 — Sheathing inspection

3.2.5.1 — Sheathing damage

3.2.5.2 — Repair procedure

3.3 — Concrete placement

3.3.1 — General

3.3.2 — Placement

3.3.3 — Protection of tendons

3.3.4 — Sheathing repairs

3.4 — Tendon stressing

3.4.1 — General

3.4.1.1 — Protection from water

3.4.1.2 — Stressing procedures

3.4.1.3 — Stressing jacks

3.4.2 — Jack calibration

3.4.3 — Elongation measurements

3.5 — Tendon finishing

3.5.1 — General

3.5.1.1 — Cutting of tendon tails

3.5.1.2 — Cutting methods

3.5.2 — Encapsulated tendons

3.5.3 — Stressing pockets

3.5.3.1 — Preparation

3.5.3.2 — Timing

ADDENDA AND ERRATA INFO

Any applicable addenda or errata are included with individual documents at the time of purchase. For a listing of and access to all product addenda and errata, visit the Addenda and Errata page. Errata page.

Return/Exchange Policy

Printed / Hard Copy Products: If your order is damaged, defective, or incorrect, we acccept its return without question within 30 days of purchase. Returns shipped COD are not accepted. University bookstores and other resellers must receive authorization from PTI to return books in resaleable condition. Authorized returns in resaleable condition are subject to 15% restocking fee.

Electronic /Downloaded Products & Online Learning Courses: These items are not eligible for return.